To store force energy, the MFFS Capacitor needs to be linked to an MFFS Extractor. To link the Capacitor to an MFFS Extractor, you need to right-click the Capacitor with a blank MFFS Card and then place this card inside the MFFS Extractor. The Capacitor can be linked to a Projector, Defence Station, Converter, or another Capacitor the same way.
The default range for transmitting energy is 8 blocks and capacity 10,000,000 FE, but both can be increased by the MFFS Capacitor Upgrade - Range up to 80 and MFFS Capacitor Upgrade - Capacity up to 28,000,000 FE respectively. Each range upgrade adds 8 more blocks to the max transmitting distance. Each capacity upgrade adds 2 000 000 to the total Force Energy (FE) capacity.
Capacitors can be linked to other Capacitors by placing card in central slot. However, unlike with other machines, Capacitor will only relay energy to another Capacitor when switched on either by redstone signal or by MultiTool, depending on selected mode in the right top corner of GUI. When it's on, the green light switches to yellow.
Capacitor has three uplink modes:
- - will relay energy only when at least 90% full
- - will relay energy only when it has more energy that target Capacitor
- -will always relay energy